Description
The BR12PP-8 tool is capable of pulling rivets from 1/8″ to 3/16″ (3.2mm to 4.8mm).
To pull different size rivets, the nose piece, jaws, and jaw pusher must be changed out. These parts are shared with the POP Avdel ProSet PB2500.
There is a pressure activated interlock on the nose of the tool, which can be software toggled on or off, to ensure correct placement of the rivet.
The mandrel collection cup must be installed or the tool will not run for safety purposes.
The same browser-based STANLEY Alpha Toolbox software is used to program the BR12PP-8 Rivet tool and the EB-Series Corded and B-Series Cordless Torque tools using any smart device (computer, cell phone, tablet, or controller screen)
There is an optional vacuum mandrel collection adapter for the tool.
The BR12PP-8 stores 500 rivet pull results, and 2 rivet traces.
The BR12PP-8 can wirelessly pair to a QBE-Series controller or to a customer supplied access points using WiFi
There is an optional barcode scanner that can be ordered, which allows you to link rivet results to serial numbers or change jobs.
